At Brock's Engine we take pride in our workmanship, and commitment to our clients. We have been providing outstanding service for customers on the Gulf coast, Eastern US coast, as well as the Bahamas, and Caribbean for more than 30 years.

Our Workshop and Facilities

We are in close proximity to several slipways and travel lifts. Crane operators are available to remove engines/gearboxes etc. for those vessels not needing to go on dry-dock. Our vehicles can transport the items to our well equipped workshop where our overhead gantry enables easy maneuverability.

We have a complete machine shop right on the premises to expedite repairs and get you back underway in short order.

Please contact us today for additional information or read more about the quality that goes into each of our remanufactured engines.

The standard-bearer for reliability, Detroit Diesel has been powering industries around the world for almost a century. The famous 2-Stroke is in more boats, pumps, generators, trucks and equipment than any other engine in the world. The Series 60 was the first truly successful electronic engine and remained the best selling engine in its class for the past twelve years.

We carry literally thousands of used hard to find engine parts for the 53, 71, 92 and 149 series of 2-stroke Detroit Diesel Engines.  In addition, our remanufactured engines are in thousands of applications around the country.  All because we build a quality product with the best customer service available today.

Brocks Engine Service provides the unique combination of service, quality and pricing that creates life-long customer relationships. As Detroit Diesel parts become harder to find, we continue to carry a huge inventory of new, used and remanufactured parts as well as DDC Parts.

Few engines manufacturers have the history of Detroit Diesel. Their engines have been powering the world for almost a century. From the rugged 53 Series to the workhorse 149, Brocks Engine Service builds them for several applications. For over 30 years now, we have serviced the commercial marine market throughout the Southeast United States.

Engine cores are completely disassembled and all parts are cleaned in a chemical vat. Engine parts are dispersed to applicable area for inspection and remanufacturing.
Machine Shop Cylinder blocks are checked for surface cracks using a magnaflux procedure.

Cylinder bores, counter bores and crank bores are checked and repaired if needed. Water passages of the cylinder blocks are pressure tested. Serial numbers, cylinder bore size and work performed is recorded before the blocks are released to the engine rebuild department. Crankshafts are checked for bends and cracks using a magnaflux procedure. Crankshafts are measured and polished or machine ground to OEM specifications. Cylinder Head Department Cylinder heads are disassembled with all plugs removed and chemically cleaned. Head castings are measured for thickness before and after being surfaced. Castings are pressure tested with new injector tubes installed.

Cylinder heads are assembled using new valves, springs,
guides, seals and cam follower rollers and pins. Rocker arms and valve bridges are reclaimed or remanufactured as needed. Cylinder heads are supplied with new plugs.
Subassemblies Department Connecting rods are remanufactured with new bushings and all measurements checked utilizing state of the art equipment. Blowers are completely remanufactured with new bearings and seals. Reclaimed housings, end plates rotors are qualified for reuse. Fuel pumps and water pumps are remanufactured using new seals, bearings and shafts. Fuel pumps are bench tested prior to release. Cam shaft end bearings are remanufactured using new bushings. Oil pumps and valves are remanufactured using new valves and springs. Reclaimed components are measured and inspected to meet original specifications. Heat exchangers are acid dipped, cleaned and pressure tested. Turbochargers, fuel injectors and remanufactured camshafts are purchased from outside vendors with many years service and experience ensuring the highest quality components available.

Brocks Engines are assembled by qualified technicians who verify the correct components and acceptable measurements of all remanufactured subassemblies and reclaimed components. Engines are assembled using all new bearings, seals, gaskets and consumable parts. 
In order to provide you with the highest quality product, specific attention has been given to ensure that all
proper procedures have been followed during assembly and that all specifications are those of the original manufacturer.